All Motor Junky

so fresh and so clean clean

Rob, wtf? Your intake is a 90 degree coupler? Haha.

birdy wrote:

Rob, wtf? Your intake is a 90 degree coupler? Haha.

Yep, a very limited production Samco Hose made for the Type R, special order from,

JAPAN

Humm... wouldn't you rather have some sort of hard pipe?

Nope, this makes more power, its silicone, pretty stiff, same company in England that makes the Radiator Hoses, so it matches those I have perfectly.

This hose replaces the stock OEM Intake Arm, Mugen never made a piece for this intake system.

MMMMMHHHH ALL MOTOR BABY I THINK WE ARE THE ONLY 2 WITH BUILT N/A MOTORS ON HERE

oh oh oh that is nice. mine isn't as clean but it's built to an extent. zc internals. on a y8. rocking the D

right on man dude i use to have a 89 av1 integra with a zc swap

i had to scrap the vtec for the time being it got stuck open, and swapped the y7 valvetrain , so it uses the vtec lobe. it's runs the same just don't have to worry about the solenoid fucking up. took it to the track two weeks ago and that's when it f-ed up....so i got the idea to swap valvetrains....it lopes at idle....only ticking is, i think i have a weak valve spring or a bad cam journal.....it's chattering on the #1....any ideas would be greatly appreciated. performance hasn't dropped it just chatters at idle and goes away once it loads up. IDK

I'm sure a lot of ya'll want specs, Heres everything I have done to the motor.
Machine work by CAMS in Crestview

Enjoy

Internal Mods

JDM B16A, DA Integra OBD1
CTR Pistons 25 Over
Stock Bottom End
King Bearings
Fully Balanced
Mugen Headgasket
Supertech High Comp Valves, black nitrided
Prelude Lost Motions
Toda Valve Springs
Toda Retainers
Toda Spec B Cams
Toda Gears
Toda Belt
Ported & Port Matched
5 Angle Valve Job
3 thousands off head
ITR Oil Pump
CTR Pulley
Spoon 9.2 Flywheel
Exedy Stage 2, 3 Puck Clutch

External Mods

Mugen ITR Intake
Samco ITR Intake Tube
Spoon 70mm throttle body
ITR Intake Manifold
RC 310 Injectors
AEM Fuel Rail & Pressure Regulator
Mugen Valve Cover
Mugen Oil Pan
Mugen Oil Cap
Mugen 4-2-1 Headers
Ultra BP Plug Wires
Samco Radiator Hoses
Koyo Aluminum Radiator

All Nuts, Bolts, Plastic, mounts, Everything is brand new OEM parts
Full wire tuck for engine harness.
Tranny is a JDM Y1 with OEM LSD

And that everyone is just the engine, don't get me started on vehicle parts,
thats insainly long

thats a nice motor man, but wheres some pics/vids of it in the car?

tonkatruck66 wrote:

thats a nice motor man, but wheres some pics/vids of it in the car?

Motor is not in the car yet, I have to finish that next. But heres a pic of it 2 years ago in the car.

thats clean man. i like it.

tonkatruck66 wrote:

thats clean man. i like it.

Thanks

oh, and howd you do that thing in your signature? i noticed jon has one on his myspace too.

Custom, you can find them in other forums. Like JDMUniverse, I have changed mine a bit in photoshop, made it look just like my car. I have had it for years.

ls/vtecJon wrote:

MMMMMHHHH ALL MOTOR BABY I THINK WE ARE THE ONLY 2 WITH BUILT N/A MOTORS ON HERE

Come on jon , you guys ARENT the only ones, look at pwr trpn.

on another note, cant wait to see this beast in the car and moving.

Clifford wrote:

ls/vtecJon wrote:

MMMMMHHHH ALL MOTOR BABY I THINK WE ARE THE ONLY 2 WITH BUILT N/A MOTORS ON HERE

Come on jon , you guys ARENT the only ones, look at pwr trpn.

on another note, cant wait to see this beast in the car and moving.

Yeah, I can't wait to finish her.
A pic of the back

about time you get around to working on it! nice work man..looking good.

robbie2883 wrote:

about time you get around to working on it! nice work man..looking good.

Yeah, I finished her up right before I left, all she needs now is the clutch, trans, fluid, and tighten up the belts, I loosened them up so theres no strain on them while I'm gone.

thats so clean i would eat off it

Looks good bro, how's cj's car?